UPVC Window Repairs
Your windows play an important role in the design and the efficiency of your home's energy usage. But, window repairs can also be damaged or even broken.
Window repairs are often cheaper than replacing the entire window. You can repair broken locks, defective handles and hinges.
1. Broken Glass
When your windows are cracked it could cause a draft or allow cold air into your home. Cracks could also be a safety danger, particularly if your home is populated by children who are young. Fortunately, it's easy to repair broken glass windows.
If you're dealing with a crack from an earthquake or a window that was struck by a stray ball the most important thing is to repair the problem quickly before it gets any worse. If the crack spreads across more than one piece of glass, or is so wide that you could put your hand into it without putting yourself at risk of bending or shattering, then you may need to replace the entire window.
To safeguard yourself from broken pieces, wear thick gloves and safety glasses. Tape over any cracks and broken areas to keep the glass in its spot. Once the tape has been applied to the glass, gently tap it to loosen it, and then take out any large pieces. Place the remaining glass in a container that is safe to dispose of.
Next lay the sash flat on the table and take off any bead strip around the frame so you can work with the glass. Remove any sealant that is around the break with a utility knife or deglazing tool. Once the old glass has been removed, you must carefully clean the rabbet to remove any trace of sealant and prepare for the new glass.
It's a good idea to keep a piece of paper next to the window to keep track of the measurements required for ordering replacement glass. This will prevent you from making a mistake when ordering glass, and will ensure it's the perfect fit.
If the glass is replaced, it's important to use a premium silicone sealant, since this will help prevent water from getting into your home. Use a polyurethane sealant on the sash's edge, which will add an additional layer of waterproofing. It is also crucial to ensure that the glass is tempered, rather than annealed. This will add an extra layer of safety.
2. Fragments cracked by cracks
uPVC (un-plasticized Polyvinyl Chloride) is a highly sought-after choice for double-glazed window frames because it is strong and easy to maintain. Windows made of this material are susceptible to damage and require repair services.
One of the most common issues is cracking of the frame which can be caused by a number of reasons. For instance cracks can be caused by hitting the window with a heavy object, like the ladder or garden tool. The frame could break, or even fall away from the wall. Cracks may also occur due to natural causes, for instance the uPVC expand and shrink over time.
Another issue is leaking from the window. It could be caused by a variety of things such as the nail fins breaking or becoming loose which allows air to enter the home. It is crucial to address these issues quickly to prevent water infiltrating your home, as this could be a major issue if not dealt with.
If the hinges of a window are damaged or misaligned, they can cause drafts and leaks. The hinges are responsible for compressing the sash and seal to close the window tightly, so it is crucial that they function properly.
Fogging of the glass is another issue that can be found. This can be caused by the seal between the glass breaking enough to allow air in and produce condensation. Re-sealing your windows can solve this issue.
You can prevent these repairs by doing regular maintenance and cleaning your windows with soapy water. For the best results and the most efficient repair, choose a professional company that is specialized in uPVC. They'll have all the necessary tools and skills to repair your windows quickly.
It is recommended to avoid slamming your windows since this can damage the frames and can also cause them to lose their insulation properties. Keep them away from direct heat sources as this could cause uPVC to crack or warp.
3. Afflicted hinges or locks that aren't functioning
Over time, upvc windows become stiff, and locks might no longer function properly. This can be a hassle and leave your home feeling less secure. However, there are many solutions to these problems without the need to buy a new window. Window repairs are usually more cost-effective than purchasing the entire window, saving you a small fortune. Our skilled upvc window repair experts at Cloudy2Clear can fix your window handles, hinges or locks so that they work exactly as they should.
UPVC windows are a great option for home improvement projects due to their long-lasting and energy efficiency. Like all things in life, UPVC windows deteriorate over time. They require regular maintenance to get the best results. Fortunately, repairing your UPVC windows or doors is a simple task that can save money in the end.
Here are a few suggestions to help you fix your UPVC windows that won't lock:
Check the seals, and the locking gearbox. If the windows are not locking, you could have to adjust the frame. To accomplish this, loosen four screws that secure a metal strip on the frame of the window to the left. Then, loosen each screw by one full turn. Be sure to not loosen the screws that secure the hinges. These are designed to allow for the window to be opened and closed and shouldn't have been tampered with.
Then then, move the sash down or up to the position you prefer. You may require shims to achieve the perfect fit. Once you've found the ideal place then tighten the screws and put the plastic caps back on.
It is crucial to have a functional UPVC windows for your comfort and safety. Don't hesitate to contact Window Geeks if you are having issues with your window. They provide free quotes and no call-out charges, and a 2-year guarantee for all their work. Visit their website for more information or give them a ring! They serve Widnes Runcorn St Helens and Warrington.
4. Damaged Seals
uPVC windows are built to last and they do well to hold up against extreme temperatures and weather conditions however, that doesn't mean they come without their faults. Condensation in the glass panes is one of the most common problems you'll encounter when using uPVC Windows. This could be a result of a faulty seal on the window, or due to the excessive moisture that is present in the home.
To prevent condensation from forming on uPVC windows, you should avoid using colored cloths since they can result in dye stains. You should also avoid cleaning products that contain harsh chemicals, since they could damage the uPVC frame. Instead, try to employ a soft white cloth that's been soaked with water to wipe down your windows. If you're worried about stains or dirt building up on your window frames it's also worth purchasing a solvent PVC cleaner available in a variety of hardware stores This will help clean your windows and aid in preventing possible future deterioration.
Another common issue that you will encounter with uPVC window seals is that they can get damaged over time, which is why it's important to replace them whenever necessary. It can be done quickly and doesn't require the assistance of a professional for the. Firstly, you'll need to take off the old seal from your window by grabbing it and pulling it out. If the seal is held on very tightly, then you could try using a knife for building to pray a portion of it away until it can be pulled away from the window frame.
Once you've removed the seal from your window then you can replace it and ensure that it's fitted correctly into the grooves of the uPVC frame. Repeat this procedure on each side of the window, until the rubber seal is fully inserted into the grooves. After you've completed this then you can look at the corners of the window for gaps, if there are any, then apply more silicone sealant to fill in these gaps and make sure that the window is completely sealed.